Bostitch combination ratcheting wrenches (not authenticated)

This set includes three combination ratcheting wrenches made of polished metal, appearing to be chrome-plated vanadium steel, featuring an open-ended configuration on one side and a 12-point ratcheting box end on the other. The three tools vary in size, displayed here from left to right with measurements clearly stamped onto the shanks. The leftmost wrench is marked with '5/8' along with the brand name 'BOSTITCH' and part number 'BTMT89954'. The middle wrench displays '11/16', 'BOSTITCH', and part number 'BTMT89955'. The rightmost wrench shows '3/4', 'BOSTITCH', and part number 'BTMT89956'. All text and part numbers are directly readable from the image and stamped or etched directly onto the face of each tool. The physical condition exhibits moderate surface wear, including minor scuffs, light smudging, and faint oxidation spots near the open jaws and ratcheting mechanisms, which is consistent with standard workshop use. The polished finish retains a reflective sheen despite the handling marks. The identification and attribution are based entirely on the clearly legible brand stampings and part numbers visible on the shanks.

Based on what I can see in the photograph, the lot consists of three combination ratcheting wrenches bearing markings consistent with the Bostitch brand, specifically part numbers BTMT89954, BTMT89955, and BTMT89956, in sizes 5/8, 11/16, and 3/4 inch. The tools display polished metal finishes and moderate surface wear, including minor scuffs and faint oxidation near the mechanisms, which is typical for workshop tools of this nature. I cannot verify the metallurgical composition, internal gear integrity, or exact production era from a photo alone; physical inspection and testing under load would be needed to confirm functionality and overall quality. Assuming the visual attribution is correct, used partial sets or individual tools of this type generally trade in this modest range on the secondary market, driven by utility rather than collectibility. If these items were to turn out to be unbranded replicas, generic copies, or lesser-quality reproductions lacking the stamped specifications, the market value would drop to the lower end of the spectrum, likely under $10 for the lot. To establish a higher degree of certainty regarding their origin and condition, a physical examination by a tool expert or hands-on mechanical testing would be necessary.