Adjustable Aluminum Axillary Crutches

This is a pair of standard adjustable axillary (underarm) crutches, constructed primarily from lightweight, high-strength anodized aluminum. The set features a classic V-shaped frame that tapers towards the bottom. The top underarm pads are made of a reinforced gray synthetic rubber or foam for comfort, matched by thick handgrip cushions positioned at the center crossbar. The handgrips are secured with wing-nut hardware to allow for manual height adjustments. The lower leg features a push-button telescoping mechanism with multiple alignment holes to accommodate various heights, ending in flared gray rubber non-slip tips for traction. Regarding condition, the metal frame shows a smooth finish with very minimal surface scratching. The gray rubber components appear well-integrated with no visible dry-rotting or significant shredding. There is slight discoloration on the lower tips consistent with light indoor use on tiled surfaces. These are modern medical mobility aids, likely manufactured within the last 5 to 10 years, showcasing standard industrial craftsmanship intended for temporary orthopedic support.

I have conducted a thorough examination of the provided documentation and imagery for this pair of adjustable aluminum axillary crutches. My assessment reveals a standard, mass-produced medical mobility aid in very good secondary condition. The anodized aluminum frame retains its structural integrity with only minor cosmetic abrasions, and the synthetic rubber components show no signs of the oxidative degradation common in older equipment. The push-button telescoping mechanism and wing-nut handgrip adjustments appear fully functional. Market valuation for these items is dictated by extreme high-volume availability. Standard medical supply retailers sell new units for $30-$50, while the secondary market is saturated with similar listings. These items are utilitarian rather than rare or collectible; their value is derived solely from functional utility. While the current condition suggests light use, I must note that a visual inspection cannot certify the structural load-bearing capacity of the aluminum or the internal integrity of the rubber tips. For full authentication and safety verification, an in-person Stress Test would be required to ensure no hairline fractures exist in the metal, and a provenance check/original receipt would confirm the manufacturer's specific weight rating. Given the current market, a resale value of $15 to $25 is appropriate, reflecting a standard discount for used medical hardware.