AI Appraisal Estimate

This is a white, built-in residential dishwasher from the Maytag Performa line, likely dating from the early to mid-2000s. The unit features a plastic exterior panel with a top-mounted control interface. The control panel includes a mechanical rotary dial for cycle selection (with settings such as Light Wash, Normal Wash, Heavy Wash, and Rinse Only) and a series of push buttons for options like Heated Dry and Water Heating. The appliance is finished in a standard white color, common for mid-range kitchen equipment of its era. Physically, the item shows clear signs of age and use; there is visible discoloration and yellowing of the plastic components, particularly on the handle/vent assembly and the rotary dial. Notable scuffs and dark marks are present on the upper right quadrant of the main door panel. The lower kickplate appears slightly misaligned. This model represents a standard mechanical-drive dishwasher known for durability but lacks the energy efficiency and quiet-operation features of modern stainless steel tub units. The 'Performa' branding is clearly visible in the center of the control fascia alongside the Maytag logo.

I have conducted a visual examination of the Maytag Performa built-in dishwasher. This unit is a standard residential appliance likely manufactured between 2000 and 2005. The 'Performa' series was Maytag’s entry-to-mid-level line, utilizing a plastic tub and mechanical controls. My assessment reveals significant cosmetic wear including UV-induced yellowing of the handle and dial, which suggests heavy use or exposure to sunlight. The scuffing and panel misalignment further indicate a 'fair' to 'poor' cosmetic condition. Market demand for this specific model is extremely low. Modern consumers prioritize energy efficiency (Energy Star ratings) and sound insulation, both of which this model lacks. Comparable sales for functioning mechanical-dial dishwashers of this vintage typically fall under $100, often being sold for parts or for use in low-end rental properties. Its value is primarily functional rather than collectible. Several factors negatively impact the value: the outdated white plastic aesthetic, the high decibel levels associated with older motor designs, and the risk of seal failure due to age. This unit is not rare; millions were produced during the early 2000s. Limitations: This appraisal is based solely on visual inspection of the exterior. I cannot verify the integrity of the motor, the condition of the heating element, or the state of the rack coating (which frequently rusts on these models). Full authentication of its operational status would require a cycle test and an inspection of the internal wiring and pump. Without provenance or proof of a recent refurbishing, the value is assessed at the lower end of the liquidation market.