Digidesign-branded rack-mountable audio interface

This item appears to be a 2U rack-mounted digital audio interface, consistent with the user-supplied identification of a Digidesign 002 Rack. The front panel bears a logo reading "digi 002 RACK" on the right side and the "digidesign" logo toward the center. It features a silver and dark grey metallic faceplate with various controls, including four gain knobs on the far left, indicator lights for sample rates and MIDI status, a monitor level knob, and a headphone level knob with an adjacent 1/4-inch jack. The construction is typical of early 2000s professional audio equipment, utilizing metal casing and plastic control knobs. In terms of condition, there is visible surface dust, some minor scuffing around the rack ear screw holes, and what appears to be a piece of clear adhesive tape or plastic film peeling off the bottom edge of the silver panel. These branding elements and structural features are consistent with hardware manufactured for Pro Tools systems from that era, though internal functionality and component authenticity cannot be verified without physical testing and inspection.

Based on the provided image, I observe a 2U rack-mountable unit bearing markings consistent with a Digidesign 002 Rack. Per user submission, the owner identifies this as a ProTools DigiDesign 002 Rack interface. The unit shows typical signs of use for early-2000s studio gear, including surface dust and minor scuffing around the rack ears. I cannot evaluate the internal electronic components or functional state from a photograph. Physical inspection and testing with compatible legacy software and Firewire connections would be required to determine full functionality. Assuming the attribution is correct and the unit functions as intended, the estimated value is between $30 and $60. The market for comparable legacy digital audio interfaces from this era is very soft, as these units require outdated operating systems and connections, severely limiting their demand in modern recording environments. If this unit proves to be non-functional, modified, or merely an empty chassis used as a prop, its value would drop to an untested parts unit, likely realizing under $20 in the secondary market.